WHAT IT IS FOR AND HOW IT WORKS
INSAFE SEAT BELT GUIDE redirects the lap belt away from the belly of a pregnant woman. It eliminates the danger of putting too much pressure on the belly in the case of sudden braking or traffic accident. Using the INSAFE adapter reduces the risk of the unborn child’s injury in the case of a car accident.
INSAFE prevents the belt’s tendency of sliding up, to the middle part of the abdomen and further to the chest, therefore, it prevents a dangerous phenomenon of so-called “diving” during a collision, which is slipping underneath the lap belt.
While using the adapter, the seat belt does not press the belly and it is not necessary to adjust it repeatedly, which provides the expectant mother with comfortable driving. The adapter is recommended from the third month of pregnancy or if it is noticeable until the end of pregnancy. It can also be used by people with abdominal obesity, after abdominal surgery and after a caesarean section.
DO YOU KNOW THAT…
A child in the womb is protected by waters and foetal membranes just like in a safe bubble. Nature has accomplished everything properly, waters provide freedom of movement and cushion injuries. However, nature could not foresee emergency situations such as incidents and road accidents involving pregnant women. A woman who weights 154 lb gains such energy on impact as if she weighed 3.44 tons (at the speed of 34 mph). Such energy acts on the seat belts which hold the passenger. If the belt is 2 inches wide, it may be assumed that the lap belt’s pressure on the pregnant woman’s belly amounts to 1 ton. It is as if a rhinoceros or a car was put on the belly. Obviously, such great forces acting on the pregnant woman’s belly can result in placental abruption or direct foetus injuries and consequently in the child’s death.
INSAFE CHANGES THE 3-POINT SEAT BELT INTO THE 4-POINT SYSTEM
- The risk of the unborn child’s injury is reduced
- The expectant mother can drive a car comfortably
- Universal – it fits most car models
- Can be installed in the front and rear seats of the car
- Patented and tested
- Made by high quality materials. The adapter was designed and made in South Korea
- Very quick and easy installation
- It is small and fits in a bag
- Weight is only 1.87 lb
- 2-years guarantee
TESTS AND QUALITY
INSAFE SEATBELT GUIDE is a high-quality product. It was entirely designed and made in South Korea – a country famous for advanced technology. The adapter’s base is made of stainless steel, which is 6.4mm thick and coated with soft rubber. The adapter has no sharp edges – it was designed to be safe and ergonomic to use. A project of INSAFE SEATBELT GUIDE was carried out with the support of the government organization Seoul Business Agency. The belt and the buckle were tested in terms of strength by FITI Testing & Research Institute in Seoul and BB.Lab – a laboratory owned by the Korean manufacturer of child seats Bonest Benest. Dynamic testing of the adapter was performed there in terms of accordance with the European safety standard ECE R16.
WHY IS THIS ADAPTER BETTER THAN OTHERS?
Other adapters hold the belt on the underbelly and hips with uncertain strength of burrs and press studs. The characteristic of the adapter INSAFE, as opposed to many others, is that it enables to lower the seat belt below the belly, redirecting the possible contact force to iliac spines and groin.